Sansion Power Electric Co., Ltd.
Providing One-Stop Service For Customers
Add to Cart
High Voltage Circuit Breaker Testing Equipment Switchgear Analyzer
General information
SXGK-F is designed to test the dynamic characteristics various voltage degree vacuum, SF6, with oil and etc high voltage and low voltage circuit breakers.
Features
1. Auto identify open or close status. To give correspondent close or open prompt according to channel's status.
2. Can detect and prompt connection status of 6 channels (12 channels for option), it's convenient to detect connection.
3. 100 groups data storage.
4. Large LCD, can read clearly even in direct sunlight.
5. Friendly English interface, easy to operate.
6. Graphical analysis function, to realize waveform and measuring processed data to displayed at same screen.
7. Delay protection, auto switch off coil voltage after breaker acting, to protect breaker and HV tester.
8. Open-closed test by auto or manual is selectable.
9. High/low voltage test is all available.
Specifications
| Time test: | 6 channels (12 channels is for option) |
| Open(Close)time | |
| Open(Close)one phase no- synchronism | |
| Open(Close)phase to phase no-synchronism | |
| Close(Open)bounce time(bounce numbers) | |
| Test range: | 0.1ms~999.99ms |
| Accuracy: | 1%±(1% read+2digits) |
| Velocity test: | Open(Close)velocity |
| Pointed periods of time(travel period or angle period)average speed | |
| Open(Close)max.velocity. | |
| Range: | 1mm Sensor:0.01~25.00m/s |
| 0.1mm sensor: 0.001~2.50m/s | |
| 0.5°angle sensor: 1cycle/ 0.5° | |
| Accuracy: | 1mm Sensor ±(1% reading+1digit) |
| 0.1mm sensor ±(2% reading +1digit) | |
| 0.5°angle sensor ±(1% reading+1digit) | |
| Travel test: | Active contactor travel |
| Contactor travel (open distance) | |
| Overshoot travel or bounce travel (amplitude) | |
| Sensor:50mm,Resolution:0.1mm | |
| Sensor:300mm(option),Resolution:1mm | |
| 360line sensor:360,resolution:0.5 ,accuracy: ±1% | |
| Screen: | 320×240LCD |
| Data Storage: | 100 groups |
| Printer: | Build-in thermal printer |
| AC source: | AC 220V ± 10%;50Hz ± 2% |
| DC source: | Output voltage:30~245V continuous adjustment,output current:≤ 15A(short time) |
| Control unit oversize: | 380×280×140mm |
| Working Conditions: | Temperature:-10ºC~+50ºC RH:≤90% |
More information, please kindly contact with us, we can customize the suitable test set according your requirements and give you the best quotation. Thank you!