Sansion Power Electric Co., Ltd.
Providing One-Stop Service For Customers
Add to Cart
PD Free Partial Discharge Free Testing Equipment Detector High Voltage
General information
SXJF-2009 Partial Discharge Tester is broadly used in the discharging test, insulation monitoring on transformer, CT/PT, HV circuit breaker, MOA, power cable and various HV electric equipments. This test set is manufactured in compliance with set international quality standards using optimum quality components under the observations of our experienced professionals.
SXJF-2009 is wildly used for power divisions, manufacturer and science researching companies.
Features:
1. Robustness, high sensitivity.
2. Sample capacitor widely use.
3. High sensitivity, wide range of test capacitor, input units (detecting impedance) well equipped, various frequency combination (nine groups).
4. To read the discharge capacity of discharging pulse directly after proper calibration.
5. Pointer and digital display at same time. Pointer type is more convenient to read the digit scale or linear scale.
Specifications
1. Test channels: 3 (standard)
2. Tested capacity range: 6PF-250uF
3. Sensitivity:
| Input Unit Nbr. | Turning Capacitance |
Sensitive Degree(pC) (unsymmetrical circuit) |
Allowed Current RMS | |
| Unbalanced Circuit | Balanced Circuit | |||
| 1 | 0~25~100PF | 0.02 | 30mA | 0.25A |
| 2 | 25~100~400PF | 0.04 | 50mA | 0.5A |
| 3 | 100~400~1500PF | 0.06 | 120mA | 1A |
| 4 | 400~1500~6000PF | 0.1 | 0.25A | 2A |
| 5 | 1500~6000~25000PF | 0.2 | 0.5A | 4A |
| 6 | 0.006~0.025~0.1μF | 0.3 | 1A | 8A |
| 7 | 0.025~0.1~0.4μF | 0.5 | 2A | 15A |
| 8 | 0.1~0.4~1.5μF | 1 | 4A | 30A |
| 9 | 0.4~1.5~6.0μF | 1.5 | 8A | 60A |
| 10 | 1.5~6.0~25μF | 2.5 | 15A | 120A |
| 11 | 6.0~25~60μF | 5 | 25A | 200A |
| 12 | 25~60~250μF | 10 | 50A | 300A |
| 7R | Resistance | 0.5 | 2A | 15A |
4. Amplifier frequency range
(1)Low terminal:10KHZ, 20KHZ, 40KHZ optional
(2)High terminal:80KHZ, 200KHZ, 300KHZ optional
5. Amplifier gain adjustment
Coarse adjusting: 6 positions, 20±1dB between every position. Fine adjusting range≥20dB.Data is 10 times between every position, for example: if the test data of the third position is 98, the second position data is 9.8. If the third position data is over 120, the operator should adjust it to the second position then do the test, and the data should be multiplied by 10, that is the final real test value.
6. Time window
Window width: 15°-150°
Every window is rotatable 0°- 170°
Two time windows can be opened separately or at same time.
7. Discharging Meter
(1) Pointer type:
Logarithmic scale:1-10-100 Error<±5%(full scale)
Linear scale:0-100 Error<±5%.
(2) Digital type:3 1/2 digits LED
0-100 Error<±3%(full scale)
8. Elliptical time base
(1) Frequency:50HZ,100HZ,150HZ,200HZ,400HZ,
(2) Ellipse rotate:30°as one position, can rotate 120°
(3) Display:Ellipse- straight line
9. Voltmeter:
(1)Range:100KV
(2)Display: 3 1/2 digits LED
(3)Accuracy:better than ±3%(full scale)
10. Oversize: 530×550×220(W×D×H)mm3
11. Weight:About 22Kg
Warranty: One year quality guarantee after shipment.
More information, please kindly contact with us, we can customize the suitable test set according your requirements and give you the best quotation. Thank you!
